Opportunity DevOps & Release work from LinkedIn, X, Reddit and Upwork, in one list. Find me work
devopsroles

Design Release Engineer – Boosted System

MARTIN Technologies haroldmartin.com Open
On-site Detroit Full-time Mid-level DevOps & Release

At a glance

Mid-level DevOps & Release role at MARTIN Technologies. Detroit · full-time · no salary stated · we estimate $120,000–$167,050 across the United States.

Estimated pay

MARTIN Technologies has not published a salary for this role. The figure below is our estimate, not theirs.

$120,000 – $167,050
What the middle half of mid-level DevOps & release roles in the United States paid, among postings that did state a salary.
Worked out from 240 postings that stated pay, median $140,388. Last updated Nov 21, 2026.
RoleDevOps & Release
SeniorityMid-level
LocationDetroit
WorkplaceOn-site
EmploymentFull-time
PostedNov 17, 2026
Role brief

devopsroles summary, based on the employer's posting.

What you'll do

  • Drive supercharger design through production release, covering thermal behavior, drive loads, lubrication, noise and durability
  • Develop and release PFI and DI injectors and fuel rails, aligning their engine, electrical, controls and calibration interfaces
  • Check fuel safety, emissions, manufacturing variation and end-of-line testing, then coordinate fuel-rail fit and assembly
  • Guide CAD drawings, engineering analysis and test correlation while keeping requirements, configurations and releases traceable
  • Lead DFMEA, DVP&R and APQP work, support validation and launch, and resolve supplier issues and engineering changes

What you bring

  • At least five years developing automotive components, including release, validation and launch responsibility on a production program
  • Strong mechanical design knowledge covering materials, sealing, GD&T, tolerance analysis and design for manufacturing and service
  • Experience with PLM, BOM, CAD-viewing, requirements, engineering-change and issue-tracking systems
  • Supplier coordination, structured problem solving, and clear technical documentation in spoken and written English

Who this fits

This role suits an engineer with production-program experience across component design, release, validation and launch. You’ll work onsite with customer, supplier, laboratory and manufacturing teams in Metro Detroit, with travel to engineering and production sites potentially required. Applicants must already have US work authorization; employer visa sponsorship is unavailable.

From the employer

Design Release Engineer – Boosted System
MARTIN Technologies | Metro Detroit Area, MI
Onsite collaboration | 5+ years of relevant experience

Turn boost and fuel-delivery designs into production-ready engine systems.

MARTIN Technologies is seeking a Design Release Engineer – Boosted System to develop and release superchargers, fuel injectors, and fuel rails. You will coordinate component performance, engine packaging, combustion, emissions, durability, and manufacturing requirements while working with customer engineering teams, suppliers, and technical specialists.

The MARTIN Legacy

With 30+ years of automotive engineering and manufacturing experience, MARTIN Technologies brings technical expertise, innovation, and precision to complex development programs. Join a team that values practical problem solving, collaboration, and engineering accountability.

What You Will Do

  • Lead supercharger development and production release, coordinating thermal performance, drive-system loads, lubrication, noise, and durability reviews.

  • Develop and release port fuel injection (PFI) and direct injection (DI) injectors and fuel rails, coordinating cylinder-head, electrical, controls, calibration, and pressure-sensor interfaces.

  • Address fuel safety, combustion and emissions impacts, manufacturing variation, and end-of-line test requirements.

  • Coordinate fuel-rail installation, packaging, and assembly interfaces with vehicle integration teams.

  • Guide CAD models and engineering drawings; coordinate CAE, calculations, and simulation-to-test correlation.

  • Maintain traceable requirements, interface specifications, bills of materials, configuration records, and approved engineering releases.

  • Lead DFMEA, DVP&R, and APQP activities; support PPAP, prototype builds, validation, production readiness, and launch.

  • Resolve failures and engineering changes with suppliers and technical specialists.

  • Assess changes for cost, mass, timing, tooling, manufacturing, serviceability, and validation impacts.

  • Track engineering risks, corrective actions, recovery plans, technical records, and lessons learned.

What You Bring

  • 5+ years of automotive component development experience, including design release, validation, and launch responsibility on at least one production program in a relevant technical domain.

  • Strong mechanical design and materials fundamentals, including sealing, GD&T, tolerance analysis, and design for manufacturing, assembly, and serviceability.

  • Experience applying reliability and warranty-prevention considerations throughout component development.

  • Proficiency with PLM, BOM, CAD-viewing, requirements, engineering change, and issue-tracking systems.

  • Supplier coordination experience and structured problem-solving skills using 8D, 5-Why, fault-tree, and fishbone analysis.

  • Strong attention to detail, technical documentation skills, and professional written and spoken English.

Technical Expertise

  • Superchargers: Roots and twin-screw fundamentals, compressor performance and efficiency, rotor timing and clearances, drive loads, torsional behavior, bearings, lubrication, overspeed, durability, and noise mitigation.

  • Boost integration: Thermal management, intercooler and water-cooled charge air cooler (WCAC) interfaces, calibration coordination, and performance, emissions, and OBD impacts.

  • Injectors: PFI and DI architecture, spray targeting, flow characterization, head and rail interfaces, deposits, leakage, thermal robustness, fuel compatibility, and electrical integration.

  • Fuel rails: Pressure-wave behavior, injector and sensor integration, brazed and welded construction, pressure-cycle fatigue, leak testing, thermal and vapor control, corrosion, and manufacturing variation.

  • Validation and safety: High-pressure fuel safety, component testing, test correlation, failure investigation, and production end-of-line controls.

Preferred Education

Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or a related engineering discipline preferred. Equivalent technical education and relevant experience will be considered.

Work Environment

Onsite collaboration with customer, supplier, laboratory, and manufacturing teams in the Metro Detroit Area, MI. Travel to engineering and production facilities may be required. Follow applicable site safety, confidentiality, and data-security requirements.

Work Authorization and Visa Sponsorship

Applicants must be legally authorized to work in the United States. This position is not eligible for employer-sponsored employment visas now or in the future. Applicants who require MARTIN Technologies to provide employment visa sponsorship to begin or continue employment are not eligible for this position.

Equal Employment Opportunity

MARTIN Technologies is an Equal Opportunity Employer. Qualified applicants will receive consideration without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other status protected by applicable law.

Opportunity

DevOps & Release work from LinkedIn, X, Reddit and Upwork, in one list.

Each morning you get everything that fits, strongest first.

DevOps & Release

Find me work

By the team behind devopsroles.

Find me work
Opportunity

DevOps & Release work from LinkedIn, X, Reddit and Upwork, in one list.

Each morning you get everything that fits, strongest first.

Find me work

By the team behind devopsroles.